Texas Robot Combat is back for our second event of 2024! We're running three brackets across two arenas, at the same time! Spectators are free!
Important information: This event takes place in the REV Robotics shop. Please bring water and snack to stay full and hydrated. There is not a water fountain in the venue so all water will have to be brought onto the site. We have had a concessions stand before and will update if it is happening again. Remember that we are guests in the space, so please respect the shop and the facility. The REV venue is awesome and we had a great time last time around.
Pit space is limited. We have a limited number of pit tables. Please bring your own table if you are able to. Teams that don't bring their own tables will be assigned a half of a table per 2 robots registered. Please don't crowd the pits. Only have the required personnel to repair robots in the pits to keep them open for others.
Signups are limited to one robot per driver per weight class.
ALL SIGNUPS MUST BE DONE BEFORE THE EVENT. We are expecting the event to fill up, so register fast!
Date:
November 16th, 2024
Location:
REV Robotics HQ
2941 Commodore Dr Suite 110,
Carrollton, TX 75007
Entrance is through the rightmost doorway in the front of the building.
Schedule:
8:00 - Doors open and check in starts
8:15 - safety starts
10:00 - Check in closes, you MUST be in the building by now if you plan on competing
10:10 - Drivers meeting, brackets will be finalized at this point
10:30 - Fights begin with round 1
12:00 – Break for lunch between round 1 and round 2
12:45 - Round 2 fights begin, all classes
14:30 - Round 3 fights begin, all classes
16:00 - Brackets are finalized and start.
19:00 estimated wrap up time
Classes:
3lb full combat beetleweights
1lb full combat antweights
1lb Plastic antweights
Registration fees:
Beetleweight: $30
Antweight: $20
Plastic antweight: $20
Arena:
nts will be run in the 6x6x2 arena. Beetles and plastic ants will run in the 8x8x4 big box. We may choose to run antweight final fights in the 8x8x4 arena depending on schedule.
The 6x6x2 arena has wooden floors. We will be removing the corner pits by popular demand. TBD on whether they will be permanently covered or will have the wood floor filled in.
The 8x8 arena has wood floors and polycarbonate kickplates that are approximatley 6" tall. There is a 3" gap between the kickplates and the walls, and this will count as an out of the arena area. Bots stuck in this zone will be counted out.
Rules:
We will follow the basic sparc ruleset. Full ruleset can be found here: https://shorturl.at/gtEI6
General Rules:
No heat, fire, smoke, entanglement, or other weapons that do not fit the spirit of the rules.
No weight bonuses for shufflers or other novel motion bots
Bots will have 20 minutes between fights for repairs. This 20 minutes is per bot not per competitor, so if you bring multiple bots you might use up repair time while fighting with the others.
1 unstick per bot. We cannot promise that you won’t get stuck on the arena so be careful with your forks
If your battery is exposed or outside your robot the fight will be ended immediately in a technical knock out (TKO)
Plastic antweight specific rules:
Approved materials are 3D printed ASA, PET, PETG, ABS, ASA, PLA, and PLA+. This means that sheet ABS or cnc machined parts are not legal. TPU and other flexible filament parts are illegal to be used as part of your chassis, armor, or weapons. If you have questions about a specific material’s legality then please contact the EO.
Plastic antweight winning robots will be added to a TRC hall of fame. Due to the experimental nature of the plastic antweight class we will ask that these hall of fame bots do not return. We welcome their builders to develop new types of robots for the next TRC event!
The hall of fame is:
December Destruction 2023 – Underbite
Robot Rebellion 2024 – Fully Dogga
Format:
Modified swiss
3 rounds of swiss, then all bots with 2 wins go into a single elimination bracket, This gives more people more fights and lets us be more flexible in the schedule.
2 minute matches
Judging criteria TBD
Brackets:
Bracket links will be posted when they are read
Safety:
Safety is the #1 priority for our events.
All competitors will be required to wear eye protection in the pits and near the arenas.
Batteries will be charged on a communal battery charging station and must be in a LIPO bag when charging.
There will be a designated power tools area for drills, dremels, and soldering irons. Please remember to use proper PPE when using tools.
Bot Class | Registrations |
---|---|
Open Ants | 0 |
Plastic Ants | 0 |
Open Beetles | 0 |