First State Fights #2


Kenneth Brandon :

Important Change: Plastic Antweights MUST be 3d printed. TPU is no longer on the list of allowed materials for plastic ants.

-When: October 23rd 2021 9am-fights end(venue closes at 9pm)

-Where: First State Hobbies 600 Peoples Plaza, Newark, DE 19702

-Format will be double elimination depending on participation. If registration does not fill we will most likely run round robin. 

-Arena is 6x6 plywood floor. 1/4" minimum thickness polycarbonate walls with one corner of the arena having a lip creating a pit. If you end up in the pit you will have a 10 second countdown to get out. If you can not the match will be called. In the last 30 seconds the pit floor will lower not allowing escape.

-Registration fee and waiver will be handled day of the event.

-Additional robots with the SAME driver will be $20 per robot.

-Pits will be provided but please bring your own extension cords/power strips just incase.

-IMPORTANT - All weapons must have a proper lock -All lipoly batteries MUST be stored/charged in a lipo sack -All robots must be wheels up while in the pits -If you activate your robot for any reason while NOT in the arena you will be removed from the tournament

Location: 570 Peoples Plaza, Newark, DE 19702, USA


Date: Saturday, October 23, 2021

Begin: 09:30

End: 21:00

Registration: July 27, 2021 - October 23, 2021

Bot Class Registrations
Fairy 1
Antweight 15
3d Printed Plastic Antweight 7